Small Lab Mini 2L Electric Atomizer Centrifugal Spray Dryer For
Fruit Juice Milk
Product Parameter
| Air inlet temperature | 30～300℃ |
| Air outlet temperature | 30～150℃ |
| Electric heater power | 3KW AC220V |
| Evaporation | 2000mL/H |
| Maximum feeding capacity | 2000mL/H |
| Fan power | 0.55KW |
| Maximum air volume | 5.6m³/min |
| Maximum air Pressure | 1020Pa |
| Air compressor power | 0.2KW |
| Nozzle diameter | 1.00mm |
| Operating Temperature | 10～40℃ |
| Dimension | 800 x 650 x 1300 ( mm ) |
| Weight | 125KG |
Spray dryer Description
Spray dryer is a drying equipment for dealing with solution,
suspension or slurry material. It is used to spray the material
into droplets dispersed in hot air. The material and the hot air
are parallel flow, countercurrent or mixed flow of the way to
contact each other, so that the moisture evaporates quickly to
achieve the purpose of drying.
This drying method can eliminate the concentration, filtration,
grinding and other operations, and can obtain 30~500μm granular
product. The drying time is very short, generally 5~30s. Suitable
for drying of high heat sensitive materials and easily dispersed
materials in the process of liquid concentration.
Experimental spray dryer, compact design, self-contained, no other
facilities can be run.
One-click startup, color large LCD touch screen operation.
Fully automatic or manual monitoring two modes of operation.
It is the smallest volume, the least noise, drying effect is very
excellent a spray dryer.
Spray dryer Features
1, fast drying speed. After centrifugal spray, the surface area of
the material liquid is greatly increased. In the high temperature
air stream, 95% to 98% of the moisture can be evaporated instantly,
and the drying time only needs a few seconds.
2, the use of parallel flow type spray drying can make the droplet
flow in the same direction with the hot air, although the
temperature of the hot air is higher, but because the hot air
enters the drying room immediately contact with the spray droplet,
the indoor temperature drops sharply, and the wet bulb temperature
of the material is basically unchanged, so it is also suitable for
the drying of heat-sensitive materials.
3, a wide range of use. According to the characteristics of the
material, it can be used for hot air drying, centrifugal
granulation and cold air granulation. Most products with very
different characteristics can be produced by this machine.
4. Because the drying process is completed in an instant, the
particles of the finished product can basically maintain the
spherical shape of the droplet, and the product has good
dispersion, fluidity and solubility.
5. the production process is simplified, the operation and control
is convenient. Spray drying is usually used for solution with solid
content below 60%. After drying, there is no need for grinding and
screening, which reduces the production process and simplifies the
production process.
6. In order to protect the material from pollution and prolong the
service life of the equipment, all parts in contact with the
material are made of glass or stainless steel.
7. the feed liquid after spray, atomized into dispersed particles,
surface area greatly increased, and hot air contact in a very short
time can complete the drying process.
