Product Description .
Description of rotary evaporator price
RE-2002 rotary evaporator's rotary bottle maximum capacity is 20L,
receiving bottle's maximum capacity is 10L, rotate speed is
0-140r.p.m, motor power is 180W. RE-2002 rotary
evaporator(evaporating bottle volume>10L) is equipped with
double condenser(main and vice condenser), which has better
condensation effect and higher recovery rate. Because this rotary
evaporator works under vacuum condition, and contact segment all
adopt high temperature resistance material-high borosilicate glass
and PTFE material, it is especially suitable for heat reactive
material and material which is corrosive to stainless steel's
concentration, crystallization, separation and solvent recovery.
The rotary evaporator has advantages of large contact area, high
evaporation efficient, easy to handle, low noise, good sealing
performance, complete in specifications and can manage easily foam
material. It already has various specification products: 2L, 3L,
5L, 10L, 20L, 30L, 50L, 100L and so on, and the 100L rotary
evaporator is an exclusive research and developed large-size rotary
evaporator of our company, designed for the purpose of mass
production need.
Product Display .
If you are interested in this product, pls send me inquiry Contact Supplier
Technical Parameter of Ideal Plant Essential Oil Distillation
Equipment for Russian
| Basic Parameter | Type | RE-2002 |
| Glass Material | GG-17 |
| Support Material | stainless steel |
| Shell Material | Antisepsis Plastic Spraying 630*534*638 mm |
| Inner Container Material | stainless steel 450*250 mm |
| Baseboard Size | 534*504 mm |
| Volume of Rotary Bottle | 210L ¢95 flange aperture |
| Volume of Recycling Bottle | 105L ¢60 flange aperture |
| Vacuum Degree | 0.098Mpa |
| Rotating Power | 120W |
| Rotating Speed | 0-110rpm |
| Heating Power | 5KW |
| Temperature Control Range of Bath Kettle | 400℃ |
| Temperature Accuracy | ±1℃ |
| Voltage/Frequency (V/Hz) | 220V/50Hz |
| Up and Down Distance | 180mm |
| Shape Size(mm*mm*mm) | 1170*540*2200 mm |
| Package Weight (KG) | 123 |
| Function Allocation | Speed Adjustment Mode | Electrodeless Speed Regulation |
| Rotating Speed Display Mode | Digital Display |
| Temperature Display Mode | Digital Display K Type Sensor |
| Temperature Control Mode | Smart Temperature Control |
| Sealing Mode | PTFE Sealing |
| Condenser | Vertical efficient condenser, main condenser 130*680, assistant
condenser 160*530 |
| Up and Down Mode | Manual Up and Down of Main Engine |
| Continuous Charging | 29# Standard Aperture Feeding Valve |
| Vacuum Display Mode | Vacuum Meter |
| Continuous Collecting | Check valve control |
| Charging Mode | PTFE Charging valve, ¢60 flange aperture |
| Optional Equipping | Up and Down Mode | Automatic Up and Down |
| Collecting Device | Double Recycling bottle |
| Anti-explosion | Anti-explosion Frequency Changer, Anti-explosion Dynamo EX120W |
| Frame Part | Plastic Spraying or PTFE Spraying |
| Bath Kettle Material | whole 304 stainless steel |
| Our company's laboratory glass and laboratory instruments are
independent research and development, available for custom-made
according to client requirements. |
Packing List of Ideal Plant Essential Oil Distillation Equipment
for Russian
| Machine Part | Glass Part |
| Nose | 1 set | Rotary bottle | 1 unit |
| Floor shelf | 1 set | Recycling bottle | 1 unit |
| Aluminum Backing Ring of Assistant Condenser | 1 unit | Main condenser | 1 unit |
| Vacuum meter | 1 pc | Air conduction bottle/td>1 unit |
| Rotary nut | 1 set | Feeding Valve | 1 unit |
| Assistant condenser nut | 1 set | ¢60 flange tap | 1 unit |
| PTFE sealed joint sleeve | 1 set | 24# vent valve | 2 units |
| PTFE feeding valve with flange plate | 1 set | 19# vent valve | 1 unit |
| Check valve | 1 set | Rotary shaft | 1 unit |
| Aluminum Backing Ring of recycling bottle | 1 unit | Assistant Condenser | 1 unit |
| ¢60F4 pad | 3 units | | |
| ¢80F4 pad | 1 unit | | br> |
| Big black hat | 3.5 sets | | |
| Transducer | 1 set | | |
| Water bath kettle | 1 unit | | |
| Condenser pipe clamp | 1 unit | | |
| The final interpretation of this operation manual is reserved by
our company. If any change in product, please be subject to the
real product. The operation manual will not be changed. |
Corollary Equipment .
1. Rotary vacuum evaporator matching use with circulating water
vacuum pump to offer a vacuum environment for reduced pressure
distillation, they are widely used for vacuum filtration, vacuum
evaporation, vacuum degassing, etc..
2. Rotary vacuum evaporator matching use with GDSZ series high and
low temperature circulating pump to quickly cooling or warming, the
circulating pump is an efficient equipment for quick temperature
adjustment.
3. Rotary vacuum evaporator matching use with DLSB series low
temperature cooling liquid circulating pump to conduct chemical
reaction and medicine storage which requires low temperature
environment.
Workshop .
For more information, please contact us
Contact Supplier
Contact us
for more details about price, packing, shipping and discount.
Tel: 86-371-67447999
Web: http://www.rotovap.cn
Address: Jianshe Road, Zhongyuan District, Zhengzhou,
Henan, China
Q: What’s the difference between vertical and inclined condenser?
A: They have no difference essentially. Vertical condenser is
gradually popular because of its small space usage and convenience
for transportation and use. Most high-capacity instruments use
vertical condenser.
Q: What factor decides the working efficiency of rotary evaporator
price?
A: For same type equipment, mainly includes: steam temperature,
vacuum degree and cooling water temperature. Restricted by some
material’s thermolability, the steam temperature may have certain
limitation when working, so high vacuum degree and low cooling
water temperature are two main factors for efficiency improving.
Q: How to select all kinds of Thermal Rotary Evaporator?
A: As for structure, our R series products all have excellent
corrosion resistance ability and leakproofness ability. According
to the solvent volume, 2L, 3L, 5L’s machine is fit for lab and
sample test; 5L, 10L, 20L’s machine is fit for medium experiment;
20L, 50L’s machine is fit for medium experiment and production,
especially suitable for the extraction of metal ionavoiding
polluted material.
